IJet-7 Series

iJet7 & iJet7L fluid dispensing systems offer both precision and flexibility with a combination of electronic dispensing head and control software.

Strengths

You can use our Whatsapp support line to get information.

Heated valves for viscosity control
35 degree tilt and 360 degree rotation
PCB heater enhances material flow for underfill applications
Precision weight measurement ensures accurate volumetric dispensing
Multiple valves available: Pneumatic jet valve, Slide valve and Screw valve
Laser height detection to calibrate Z axis automatically for component deformation

Board Handling

Standard Work Area	Single valve X 380 × Y 450 x Z 30 mm (X 14.96" × Y 17.71" x Z 1.18") Dual valve X 260 × Y 450 x Z 30 mm (X 10.23" × Y 17.71" x Z 1.18")	Single valve X 650 × Y 650 x Z 30 mm (X 15.75" × Y 19.68" x Z 1.18")
Maximum Components Height	± 30 mm (1.18") from PCB
Acceleration	0.8 g
PCB Edge Clearance	≥ 3 mm (≥ 0.12")
PCB Clearance Topside	30 mm (1.18")
Maximum Conveyor Width	450 mm (17.71")	650 mm (25.59")
Minimum Conveyor Width	50 mm (1.97")
Fluid Volume	30 cc
Fluid Level Sensor	Automatic monitor
Intelligent Automatic Nozzle Cleaner	Non-contact vacumm nozzle cleaning

Transmission System

XYZ Axis Configuration

Number of Valves	Single valve (Optional : Dual valves)	Single valve only
Motor	Servo motor with ball screw
Maximum Speed	1000 mm/s	800 mm/s
Repeatability	± 0.01 mm (± 0.0004")	± 0.015 mm (± 0.00059")

Facility

Interface

Controller	IPC and motion controal card
Software	Anda user interface with Windows OS
Programming	On-line vision programming
Communications Protocol	SMEMA