SP21 - Pneumatic Step-by-Step Feeder for the Preparation of Radial Taped Components

  • SP 21 03 - Straight cut Adjustable Height
  • SP 21 09 - Cut and Bend 90° 
  • The pneumatic feeder SP21 is designed for the preparation of taped radial components.
  • It's a very fast system suitable for adjustable height cuts or cutting and bending at a 90° angle.
  • It is mechanically operating, complete with cylinders; without electrical or pneumatic systems or PLC.
  • This feeder can prepare components to be picked up by a mechanical gripper.
  • It is suitable as a workstation on automatic assembly lines.
  • Production / Hour: 1200

SP21/A - Pneumatic Step-by-Step Feeder for Straight Cut of Radial Taped Components

  • SP 21/A 03 - Straight cut Adjustable Height
  • SP 21/A 09 - Cut and Bend 90° 
  • The SP21/A is a pneumatic machine designed to operate on taped radial components.
  •  It is a very fast system suitable for adjustable height cuts or cutting and bending at a 90° angle.
  • Components are automatically operated and then ejected into a dedicated bin.
  • Production / Hour: 1200

You can use our Whatsapp support line to get information.