SF100 ISP IC Programmer

Video

The SF100 is a high speed "In System Programming" programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.

You can use our Whatsapp support line to get information.

USB Interface
Start button feature
Signal conflict protections
Update Serial Flash soldered on board with application powered or not
Control Application, controller reset and MOSFET isolation status
Update the internal Flash of Freescale MCU using the Ezport (MCF5223, MCF5221, MCF5213) or the external SPI Flash of Freescale MCU using the SBF interface (MCF5445, MCF5227)
Capable of handling two serial flash memories (new feature; provided in SF100 with serial number DP001325, firmware 2.0.4, software 2.0.37 and after)
Multi-Programmers Capability
Support Windows 2003 and above
Support both 32 bit or 64 bit OS
Support 1 CS pin

USB Mode	Reference IC	Density	(Program + Verify)
Memory size	W25X80VSSIG	8Mb	11s
	W25Q16VSSIG	16Mb	15s
	W25Q32VSSIG	32Mb	20.5s
	W25Q64FVSSIG	64Mb	48.5s
	W25Q128BVFIG	128Mb	94s
	W25Q256FVFIG	256Mb	157s
	S25FL512SAGMFI011	512Mb	297s

*Please note the programming and verify time will depend on different IC type; please refer to the IC specification before programming.