Temperature Testing Chambers

Home Page Products Other Test Systems Temperature Testing Chambers Temperature Testing Chambers

ETSP-LTO series are temperature testing chambers for durability or operating status of parts and products in extreme conditions (LN2 cooling is option).  Solutions for noise, temperature variations, unbalanced air distribution are provided inside the chamber.

You can use our Whatsapp support line to get information.

Temperature range -40 ℃ ~ +180 ℃ (single stage refrigeration system)
-70 ℃ ~ +180 ℃ (cascade refrigeration system)
Temperature accuracy Less than ± 0.1 ℃
Temperature stability Less than ± 0.5 ℃ at ateady state conditions
Temperature uniformity Less than ±1% of setpoint (Less than ± 0.1 ℃ at 100 ℃)
Heat-up rate 0.5 ~ 5 ℃/min
Cooling rate 0.5 ~ 5 ℃/min
Humidity range 20% ~ 98% RH(10% ~ 98% RH is an optional spec)
Humidity stability Less than ±1.5% RH at steady state conditions without heat dissipation in time
Humidity uniformity Less than ±3.0% RH
Condensing Air cooled or water cooled type
Input power requirements 220V/380V, 50Hz/60Hz, 1Ph/3Ph

 

Model Internal dimensions External dimensions Useful capatity
ETSP-TH 60 300x400x500 (WxDxH) mm 900x900x1500 (WxDxH) mm 60 liters
ETSP-TH 150 500x500x600 (WxDxH) mm 1100x1000x1600 (WxDxH) mm 150 liters
ETSP-TH 500 700x700x800 (WxDxH) mm 1300x1100x1800 (WxDxH) mm 392 liters
ETSP-TH 1000 1000x1000x1000 (WxDxH) mm 1600x1500x2100 (WxDxH) mm 1000 liters

Options

  • Dry air supplier for low humidity control
  • Chart recorder
  • Dust filter for condensing coil
  • Additional port hole and rubber plug
  • Additional shelves
  • Oven networking connection system(RS422/RS485)
  • Customization available

Included Accessories

  • Shelves
  • Viewing window (heater wire including, reinforced window) and interior light
  • Cable port and rubber plug
  • Caster for moving
  • Cartridge type water reservoir with connector
Please enter your contact information. A member of our sales team will contact you about offer request.