• 2-way sliding work exchanger provides a simultaneously in-and-out working to limit the idle time, which in turn reaches the utmost output value. 
• Available in linear and cutting to diminish restrictions of PCB design. 
• Friendly man-machine interface with 10X CCD Camera to minimize the time of programming. 
• Auto Fiducial mark point check and cutting route auto compensation(option). 
• Vacuum cleaner with auto power on/off function to save the power. 

2-way Sliding Exchanger 
This work exchanger provides a simultaneously in-and-out working space to limit the idle time, which in turn reaches the utmost output value.

Route Duplication 
The user may set mark points on PCB and copy easily form side to another.

Routing Bit Sectioning 
The user may set a designated distance, and have the routing bit shift-up or -down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.

Friendly GUI 
Windows system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.