MX-5220 Ultra Fine Soldering & Rework System

Video

New Dual Port Simultaneous Soldering and Rework System with UltraFine Soldering Hand-piece for soldering and touch-up of very small components, restricted access or high density component packaging on a PCB.

Product Comprises of:

MX-PS5200: Power supply, 100 to 240 VAC input, dual switch port with LCD Display
MX-H2-UF: Metcal UltraFine™ Hand-piece, Soldering and Rework with one cartridge removal pad
MX-W1AV: Metcal TipSaver™ Workstand with one sponge and one brass pad
NOTE: No tip/cartridge included

You can use our Whatsapp support line to get information.

Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.
Configured with the Metcal UltraFine Soldering Hand-piece.
Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.
Improved ergonomics with lightweight hand-pieces.
Greater process control with SmartHeat® Technology.
ESD safe with incoming AC ground monitoring circuitry.
Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.
Metcal TipSaver™ Workstand improves tip life with its “Auto-Sleep” function.

Ambient Operating Temperature: 10- 40°C (50°F - 104°F)
Maximum Enclosure Temperature: 55°C (131°F)
Input Line Voltage: 100- 240 VAC, grounded circuit
Input Line Frequency: 50/60 Hz
Power Consumption: 125 Watts
Output Power Maximum: 80 Watts max. Per channel at 22°C (when operated with two hand-pieces dynamically, the 80 watts output power is is shared based on demand)
Output Frequency: 13.56 MHzC
Power Cord 3-Wire: 183cm (18/3") SJT
Dimensions w x d x h: 12.1cm x 13.0cm x 23.5cm
(4.8" x 5.1" x 9.3")
Certification / Marking: cTUVus, CE
Tip-to-Ground Potential: < 2mV
Tip-to-Ground Resistance: < 2 ohms
Idle Temperature Stability: ± 1.1°C (2°F) in still air
Hand-piece Cable Length: L=178cm (70"), burn resistant, ESD safe
Hand-piece Connector: F connector
Workstand Dimensions w x dx h: 8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")
Weight of the power supply: 7.4 lbs (3.35 kg)
Weight of the * workstand: 1.05 lbs (.476 kg)

UFTC Ultra Fine Soldering Cartridges