SF600Plus Flash IC Programmer

SF600Plus is high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.

SF600Plus combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.

SF600Plus is an upgrade version of SF600. The main difference is that SF600Plus embeds an 8GB memory, which allows standalone programming.

You can use our Whatsapp support line to get information.

USB High speed and high SPI performance, support up to 2Gb SPI Flash
In-Circuit Programming: Program on board SPI Flash
Off-line Programming: Program SPI Flash in the socket
Start button feature: Able to Batch in the USB mode
Standalone mode: Support Start button programming and IO Port programming.
ISP Port supports 2 CS pins to program two Serial Flash memories
Signal conflict protections
Multi-Programmers Capability through USB
Support 1.8V low voltage IC
Support Windows 2003 and above
Support both 32 and 64 bit OS

USB Mode	Reference IC	Density	(Program + Verify)
Memory size	W25X80VSSIG	8Mb	9s
	W25Q16VSSIG	16Mb	11.6s
	W25Q32VSSIG	32Mb	12.6s
	W25Q64FVSSIG	64Mb	31s
	W25Q128BVFIG	128Mb	61.7s
	W25Q256FVFIG	256Mb	89.2s
	S25FL512SAGMFI011	512Mb	147.4s

*Please note the programming and verify time will depend on different IC type; please refer to the IC specification before programming.